Hi, Guest!
  • dari 15 halaman

Jual Beli Produk Sarung Tangan Pelindung

Rubber 25kV Electrical Insulating Gloves

Rubber 25kV Electrical Insulating Gloves

Sarung Tangan Pelindung
  INSULATING GLOVES WITH POWER OPERATING 25kV insulating gloves with Power operation is initiated production in nation by according to IEC60903-2002. Its function index come up to advanced world standards, became to new & amp, good protection product with power operating. It can be applied to below AC 25kV and 30kV for operating place. In the original package, from production date, within 24 months the quality guaranteed after it is used, preventive test must be done every 6 months, can be used only after checking. It can be careful fill gas to check before using. Don’t use if have any damaged. After using it was stored by rational, keep to clean and dry. To prevent acid, alkali and oil other corrode matter etc. Far away hot source. Mechanical requirements (sampling test) Average tensile strength : ≥16 MPa Average elongation at break : Puncture resistance : ≥18N/mm Tension set : ≤15 % Ageing requirements (sampling test) Conditioning of the gloves in an air oven at 70 ± 2 °C for 168 hours : The elongation at break values must be at least equal to 80% of those of non conditioned gloves. The tension set must not exceed 15% The gloves must pass the proof test voltage and withstand test voltage. Thermal requirements (sampling test) Resistance to low temperature : conditioning of gloves for 1 hour at -25 ± 3°C. The tests are satisfactory if no tearing, breaking or cracking after folding is visible on the cuff and if the gloves pass the proof test voltage and withstand test voltage. Flame retardancy test : Application of a flame for 10 seconds at a finger tip. The test is satisfactory if, after 55 seconds, the flame has not reached the marker located 55mm away at the other end.
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. PENDOPO NIAGADAYATAMA

    Jakarta Selatan • DKI Jakarta • Indonesia
FUNAYAMA - K-TFG9BK Professional Gloves

FUNAYAMA - K-TFG9BK Professional Gloves

Sarung Tangan Pelindung
FUNAYAMA - K-TFG9BK Professional Gloves     Protection Gloves for Firemen               K-TFG9BK Globes are products that     achieve high degree of "heat protection"     and "easiness in motion".               Gunn Cut Sewing     One piece of fabric is used to covers the palm side and   sides of the fingers     Fitting comfort and durability is improved as there is no   seam running along the palm side of the fingers.               3D Sewing Method     The parts comprising the palm and back of the hand are   cut at uneven lengths, with the palm side shorter.     This is a 3D structure that seeks to pursue ease of grip for   the palm of the hand.               Roll Guard         1 sheet of ceramic leather is used to cover the palm up to   the fingertips of the back of the hand.     This helps to prevent loose threads around the fingertips,   and is effective in absorbing shock and enhancing safety of   the fingertips.                 Ceramic Leather     This material combines ceramic particles in the process of   tanning the hide.     The leather used is combined with ceramic particles, and   has enhanced frictional strength.               High Strength Material     Outer material is used para-aramid fibers with high strength,   and excellent flame retardancy, heat resistance and cut resistance.           Breathable-Waterproof Material     PU film is laminated on the inner material. In addition to that,   we installed an additional single seamless PU film to enhance   waterproofness.
Harga
Hubungi Kami
Min. Order
1 buah

  • SENTRA TEKNIK UTAMA

    Jakarta Pusat • DKI Jakarta • Indonesia
  • dari 15 halaman