Hi, Guest!
  • dari 27 halaman

Jual Beli Produk Tester Insulasi

CHAIR BASE TESTER

CHAIR BASE TESTER

Tester Insulasi
Chair Base Tester    Main function : Chair Base Tester is used for the vertical pressure testing , destructive testing and fatigue testing of the office chair Ipomoea base ( Star Base ) , repeated pressure loading in setting force and test cycle as the fatigue test . All holding pressure time and cycle number of tests can be adjusted . Computer operation : With “Windows” work platform , all parameters set by dialog , easy to operate ; Software language all in English ; Edit the test reports by yourself , all test parameters in main interface ; Can choose time and elongation , elongation and force and others curve  With variety unit , metric system can switch ; With automatic back and calibration function ; with magnification function to reach suitable graph ; Test speed can settable by customer ; With define test method , all test parameters can analysis automatically ; Get the test reports automatic and print out in A4 paper , also with curve or save in Word format . Generl specifications  Machine Dimensions: (W x D x H) 1410*1360*1700 mmPower supply source: single-phase, AC220V±10%, 50/60Hz (can be appointed)Gross Weight: 450kg   Standard Features Capacity 2000kg ( Transcell senor) Unit switch gf,kgf, N, LBf, W, KN, T Load resolution 1/250,000 Load accuracy within ±0.5%  Max stroke 800mm including grip Test speed (0.01-100)mm/min (computer input) Drive device imported servo motor Stroke resolution 0.001 mm Accessories one computer with operation software     Application Standards: BIFMA X5.1 2011 Reference Doc: BIFMA X5.1 2011   clause 7 Base Test-Static   Procedures A chair with casters is mounted on the moveable platform as shown in Figure 13. A 300-pound load is applied to the chair seat with the chair spindle fully extended. The base is attached to a mechanical device that exerts a horizontal push and pull of from 30 inches to 34 inches as illustrated in the figure. The base and casters are free to rotate and swivel. The machine operates continuously at a rate of 8 to 10 cycles per minute with a maximum speed of 50 feet per minute. One cycle consists of a forward and backward stroke of the mechanical device. Testing continues until the base or a caster suffers structural breakage, loss of serviceability, or a failure that would in any way cause personal injury to the occupant or bystanders, or, the desired acceptance level is met. BIFMA X5.1 2011 Base Test Procedure: Remove the casters or glide foot (castors/ glide stems shall remain in place). Caster/ glide stems are required for support. Remove the seat support mechanism and height adjustment mechanism (if applicable) from the base. Apply the load to the vertical support column, or test fixture that simulated the taper/base interface.  a) A force of 11,120 N (2500 lbf.) shall be applied for one minute b) Remove the force c) Apply a second force of 11,120 N (2500 lbf.) for one minute d) Remove the load Our Services: If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer. 1. Pre-service    --24 Hours online service for your consult.    --Help choose right model,and a series of service,person,advise. 2. Middle service     --Give you best offer     --Provide discount for many sets order     --Do customer's request:     --Choose payment term you convienent.     --Promptly production and delivery,inform you in time.     --Can provide invoice value as you like to decrease your tax.     3. After sale service :    --1 year warranty service and all life maintenance.    --Technical Egineer are avalible for oversea trainning.    --Free change for some parts    --Remote control technical consult    --Free installation DVD    --Maintenance plan 4,Commitment:    We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 5,Good Packaging:     Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Harga
Hubungi Kami
Min. Order
1 buah

  • Pusat Alat Uji & Pengukuran ( Distributor-Agent-Services)

    Jakarta • • Indonesia
CHAIR SEAT ROTATING TESTING MACHINE

CHAIR SEAT ROTATING TESTING MACHINE

Tester Insulasi
Chair Seat Rotating Testing MachineSpecifications Chair Seat Rotating Testing Machine is used to test the durability of the seat swivel of the chair. According to test Standard: BIFMA X5.1-2002, Test No. 8,11      The usage: Office Chair Seat Rotating Testing Machine is a two station testing equipment. According to test Standard: BIFMA X5.1-2002, Test No. 8,11 Applicability: This test applies to all types of the swiveling chairs. Purpose of Test: to evaluate the ability of a chair to withstand heavy impact forces on the seat. Office Chair Seat Rotating Testing Machineis designed for dynamic and cyclic durability seat test.   Specifications  Office Chair Seat Rotating Testing Machine Mode HD-F731 Counter 0-999,999, memory, output control Impact sandbags diameter 16 inch 125 pounds standard sandbbags Static pressure mould diameter 8 inch, 165 pounds briquetting Impact speed 10-30 times/minute or specified Static pressure speed 10-30 times/minute or specified Cylinder stroke 0-300mm Rail height 90-135cm Machine size 270*85*80cm Power AC220V, 3A BIFMA requirements impact 100000 times+ static pressure 20000 times(left)+static pressure 20000times (right)   Main function: Chair Seat Rotating Testing Machine applies on all kind of office chair which with swivel platform. Used to evaluate the office chair to withstand repeated pressure and wear ability in rotation. It provide two mode of testing: 1. Can set the clockwise and counter-clockwise angle(45°to 355°) 2. 360°rotation single direction   STANDARD FEATURES Framework 1 framework with traverse member and base plat 1200mm ×1200 mm , 12mm thick, galvanized steel Rotation test axis 1 electromotive test axis for the rotation of the turning knob, position-controlled, rotation angle +/- 360° Pneumatic test axis   1 pneumatic test axis for seat, load controlled, position diameter 80mm, stroke 500mm Load Load up to 1900N, 2 × Load Cell 2KN. Load is transmitted vertically to the seat with lateral adjusting range Limit Control Operating pressure and cylinder limit switch control Emergency Button 1 emergency button Number and Cycles Can be set by PLC ( 0- 99,999) Accessories (Optional) 1 load pad diameter 200mm  DIN EN 1335    view:
Harga
Hubungi Kami
Min. Order
1 buah

  • Pusat Alat Uji & Pengukuran ( Distributor-Agent-Services)

    Jakarta • • Indonesia
CHAIR CASTER DURABILITY TESTING MACHINE

CHAIR CASTER DURABILITY TESTING MACHINE

Tester Insulasi
Chair Caster Durability Testing Machine Chair Caster Durability Testing Machine Specifications   1 . Chair Caster Durability Tester is used to evaluate the quality and wear life of the caster in chair .  2 . OEM Bifma × 5 . 1-2011 Section 17 ,  X5 . 5 Section 18 ,  X5 . 9 Section 11 Effective stroke 900 mm Standard loading pad ,  loading tray * 1 ,  weight :  113kg Test speed :  10 CPM   Application Standards:EN 1335, BIFMA X5.1   1. Product description : To evaluate the ability of chair base and casters to withstand fatigue stresses and wear caused by moving the chair back and forth .  Seat surface to place the weight  ( 113 kg )  ,  the holding fixture driven by motor and timing belt move to and fro ,  in order to assess the the casters of wear life ,  stroke rate and the number of times can be set . Chair caster durability testing machine is applied to assess the compressive ability of office chair armrest endurancealong the horizontal direction and vertical direction, and the durability of office chair armrest under the action of cyclic ateral pressure (10 degrees angle direction with plumb line ), to determine the compressive strength of office chair armre     2 .  Main technical parameters : driving mode variable frequency motorand timing belt Stroke 762mm  ( + 50mm ) rate 8 ~ 12 times / min holder with the up and down adjustment range 80mm~500mm control mode PLC and LCD display Voltage 220V single-phase ,  900W Design standard Bifma x 5 . 1 clause 17 1 .  Starting point for self-regulation . 2 .  Accessories :  a weight of 23 kg of load-bearing base divided into 9 equal portions per box ,  placed a 10-kilogram weight ,  the overall weight equal to 113 kilograms . 3 .  Base barriers block can be removed ,  for smoothing the surface accessibility block test .   3.Procedures A chair with casters is mounted on the moveable platform as shown in Figure 13. A 300-pound load is applied to the chair seat with the chair spindle fully extended. The base is attached to a mechanical device that exerts a horizontal push and pull of from 30 inches to 34 inches as illustrated in the figure. The base and casters are free to rotate and swivel. The machine operates continuously at a rate of 8 to 10 cycles per minute with a maximum speed of 50 feet per minute. One cycle consists of a forward and backward stroke of the mechanical device. Testing continues until the base or a caster suffers structural breakage, loss of serviceability, or a failure that would in any way cause personal injury to the occupant or bystanders, or, the desired acceptance level is met. Our Services: If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer. 1. Pre-service    --24 Hours online service for your consult.    --Help choose right model,and a series of service,person,advise. 2. Middle service     --Give you best offer     --Provide discount for many sets order     --Do customer's request:     --Choose payment term you convienent.     --Promptly production and delivery,inform you in time.     --Can provide invoice value as you like to decrease your tax.     3. After sale service :    --1 year warranty service and all life maintenance.    --Technical Egineer are avalible for oversea trainning.    --Free change for some parts    --Remote control technical consult    --Free installation DVD    --Maintenance plan 4,Commitment:    We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 5,Good Packaging:     Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.  
Harga
Hubungi Kami
Min. Order
1 buah

  • Pusat Alat Uji & Pengukuran ( Distributor-Agent-Services)

    Jakarta • • Indonesia
Digital Petroleum Thermometer TP9 ThermoProbe

Digital Petroleum Thermometer TP9 ThermoProbe

Tester Insulasi
Digital Petroleum Gauging Thermometer TP9 ThermoProbe Product Description The TP9 is an intrinsically safe digital gauging thermometer designed for use in hazardous locations. With over 30 years experience manufacturing digital thermometers, ThermoProbe has designed the TP9 with reliable RTD sensors based on our previous industry-standard thermometers such as the TP7 and TP8. The latest TP9 electronics are more accurate than previous models based on our laboratory thermometer technology. The convenient user interface provides a large 1/2” character display and buttons that can be easily used with gloves. An automatic backlight feature is included to help reading the display in low light conditions. The versatile software functions allow easy selection of Celsius or Fahrenheit units and display resolution. The arrow indicators on the display allow the user to readily establish stable readings and temperature trending. Stabilized temperature readings can be conveniently saved for later. The TP9 comes equipped with easily replaceable AA batteries, providing up to 200 hours of operation. The TP9 rugged instrument body is constructed from stainless steel and acetal components. The TP9 ergonomic probe storage and stainless construction is well suited for gauging heavy products that are hard to clean such as asphalt. With multiple probe configurations and allowable lengths up to 50 meters (165 ft), the TP9 is well suited to many tank gauging applications. The probe assembly is constructed of easy to clean materials such as non-stick cable and stainless steel. Certifications The TP9 certifications are recognized internationally (IECEx), in Europe (ATEX), Japan (TIIS) and Russia ( GOST ). Applications Recommended Operation per API 7: International Safety Guide for Oil Tankers and Terminals, API 4 and other recommended procedures and standards. Custody Transfers, Hazardous Location, Intrinsically safe, Inventory, PET, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck, Viscosity, Petroleum, Portable, Digital, Thermometer, Inspector, NIST, Certified, Ex, UL, ATEX, IECEx, TIIS, GOST, Gasoline, Diesel, Asphalt, Molten Sulphur, Petrochemical, Viscous, Caustic, Acid, Chemical, Alkali, Molasses, Syrup, Distilled spirits, Aviation fuel Specification Maximum Dimensions 10”L x 4.25”H x 6.4” W Weight 3lb. 2.4oz. ( 1429 grams ) – with 75′ standard weight probe assembly Probe 304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or  PFA Cable Jacket, Coaxial Construction Enclosure Material Stainless Steel Acetal ( Delrin ) Probe Holder Polyvinylchloride Faceplate Stainless Steel Fasteners Batteries 2 AA Alkaline; Battery Life of approximately 200 hours Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C Note : Battery may not provide adequate power if ambient temperature is extremely low or high. Temperature Resolution 0.01 Range : -40 to +400°F -40 to +204°C Calibrated Accuracy : ±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F ±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test Long-term drift not to exceed 0.05%/year Meets API requirements Certification ATEX & IECEx (Ex ib [ia] IIB T4 )
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Digital Petroleum Thermometer TP7-C ThermoProbe

Digital Petroleum Thermometer TP7-C ThermoProbe

Tester Insulasi
Digital Petroleum Gauging Thermometer TP7-C ThermoProbe Product Description. The TP7-C is an intrinsically safe digital gauging thermometer designed for use in hazardous locations. With over 30 years experience manufacturing digital thermometers, ThermoProbe has designed the TP7-C with reliable RTD sensors based on our previous industry-standard thermometers such as the TP7 and TP8. Based on our laboratory thermometer technology, the latest TP7-C electronics are more accurate than previous models. The convenient user interface provides a large 1/2” character display and buttons that can be easily used with gloves. An automatic backlight feature is included to help read the display in low light conditions. The versatile software functions allow easy selection of Celsius or Fahrenheit units and display resolution. The arrow indicators on the display allow the user to readily establish stable readings and temperature trending. Stabilized temperature readings can be conveniently saved for later. The TP7-C comes equipped with easily replaceable AA batteries, providing up to 200 hours of operation. The TP7-C rugged instrument body is constructed from aluminum and polypropylene components. The TP7-C spool-reel design allows the user to quickly deploy and retrieve the sensor probe into various products. With multiple probe configurations and allowable lengths up to 50 meters (165 ft), the TP7-C is well suited to many tank gauging applications. The probe assembly is constructed of easy to clean materials such as non-stick cable and stainless steel. Certifications The TP7-C certifications are recognized internationally (IECEx), in Europe (ATEX), Japan (TIIS) and Russia (GOST). Applications Recommended Operation per API 7: International Safety Guide for Oil Tankers and Terminals, API 4 and other recommended procedures and standards. Custody Transfers, Hazardous Location, Intrinsically safe, Inventory, PET, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck, Viscosity, Petroleum, Portable, Digital, Thermometer, Inspector, NIST, Certified, Ex, UL, ATEX, IECEx, TIIS, GOST, Gasoline, Diesel, Asphalt, Molten Sulphur, Petrochemical, Viscous, Caustic, Acid, Chemical, Alkali, Molasses, Syrup, Distilled spirits, Aviation fuel SpecificationMaximum Dimensions 13.5 x 7.25 x 4.5 in., 34.3 x 18.4 x 11.4 cm Weight 3lb. 12.6oz. ( 1718 grams ) – with 75′ standard weight probe assembly Probe 304 Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or  PFA Cable Jacket, Coaxial Construction Enclosure Material Polypropylene Blend, Stainless Steel and Aluminum. Batteries 2 AA Alkaline; Battery Life of approximately 200 hours Battery manufacturer’s battery operating temperatature range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is extremely low or high. Temperature Resolution 0.01 Range: -40 to +400°F -40 to +204°C Calibrated Accuracy: ±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F ±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test Long-term drift not to exceed 0.05%/year Meets API requirements Certification ATEX & IECEx ( Ex ib [ia] IIB T4 )
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Haz-Dust HD-1100 PM 10 Particulate Monitor

Haz-Dust HD-1100 PM 10 Particulate Monitor

Tester Insulasi
HAZ-DUST HD-1100 Particulate Monitor The HAZ-DUST is ideal as a portable survey tool for particulate monitoring with its simple operation and instantaneous easy to read display of measurements. It is highly sensitive yet lightweight and rugged. Applications include the identification of areas of high levels of respirable dust and evaluating dust generation and suppression. Easy operation and instantaneous readings in mg/m3 Selectable measuring ranges Easy to read digital display Highly sensitive Operates for over 8 hours Built-in battery test facility Optional data logger, supplied with DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time Optional tripod with adjustable mounting for unattended monitoring The Haz-Dust I uses near-forward light scattering to measure dust concentration. As airborne particles enter the instrument they pass through an infra-red light beam and scatter the light. The amount of light that reaches the detector is directly proportional to the aerosol concentration. Technical Specification   Accuracy ±10% Sensing Range 0.01 to 200 mg/m3, 0 to 20 mg/m3 Display Resolution 0.01 mg/m3, 0.1 mg/m3 Particle Size Range 0.1 to 50 µm Measurement Precision ±0.02 mg/m3 Calibration NIOSH 0600 gravimetric reference - NIST traceable SAE fine test dust Displayed Particle Concentration Instantaneous Power Rechargeable NIMH battery Operating Time ≥8 hours Charging Time 10 to 12 hours Temperature Operating : -20 to +60°C ( -4 to 140°F )Storage : -20 to +60°C ( -4 to 140°F ) Dimensions 22.9 x 7 x 3.8 cm ( 9 x 2.75 x 1.5" ) Weight 500 g Optional Data LoggerTechnical Specification   Display 4 line 20 character alphanumeric Data Stored TWA, STEL, Minimum, Maximum, Start/Stop times Recording Time 1 second to 15 months Data Storage 21,500 data points Sampling Rate 1 second, 10 second, 10 minute, 30 minute averaging Digital Output RS-232 Power Rechargeable NIMH battery Operating Time ≥8 hours Charging Time 10 to 12 hours Dimensions 17.8 x 8.8 x 6.3 cm Weight 450 g Haz-Dust Description Part Number HAZ-DUST  Monitor Kit, includes : monitor, 110-240 V AC Charger and carry case ( requires calibration with equipment sold separately, see below ) 770-1100 Accessories Description Part Number Calibration Standard, for verifying span and optical sensor performance 770-102 Zeroing Accessory, for pumping filtered air into the sensor for a zero reading in contaminated environments 770-130 Data Logger: data storage, on-screen display of statistics and user-selectable alarm threshold, includes analogue signal cable, computer RS-232 interface cable and DustComm Pro Software on CD 770-113 Analogue Signal Cable for Data Logger 770-107 Replacement Battery Pack for Data Logger 770-127 Tripod Stand, adjustable stand (1 to 1.5 m) and mounting plate for unattended monitoring 770-129 Cleaning Kit, includes dust-free air canister, lens cleaning solution, swabs and lens tissue 770-305 AC Charger 110-240 V, can be used to operate HAZ-DUST  for extended running time 770-131 Replacement Battery Pack for HAZ-DUST 770-108
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Haz-Dust HD-1004 Particulate Monitor

Haz-Dust HD-1004 Particulate Monitor

Tester Insulasi
Haz-Dust HD-1004 Particulate Monitor.The HAZ-DUST IV displays immediate breathing zone measurements and comprehensive graph reporting of aerosol and dust for occupational hygiene and environmental air investigations. Interchangeable sampling heads enable specific particle fractions to be targeted. An inline 37 mm cassette, located behind the sensor, may be used to collect a concurrent filter sample for gravimetric or chemical analysis. Easy operation and instantaneous, continuous display of TWA, STEL, Minimum, Maximum concentration in mg/m3 Sensor mounts directly in the breathing zone for a personal sample Interchangeable sampling heads for Inhalable, Thoracic and Respirable measurements In-line 37 mm cassette ( or optional 25 mm cassette using adaptor ) for collecting a concurrent filter sample for gravimetric or chemical analysis Small and lightweight with integral belt clip Operates for over 8 hours using rechargeable NiMH battery Automatic data logging Easy to use DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time Technical Specification   Accuracy ±10% Sensing Range 0.01 to 200 mg/m3 Display Resolution 0.01 mg/m3 Particle Size Range 0.1 to 100 µm Measurement Precision ±0.02 mg/m3 Calibration NIOSH 0600 gravimetric reference - NIST traceable SAE fine test dust Displayed Particle Concentration Instantaneous, TWA, STEL, Minimum, Maximum Sample Flow Rate 1.0 to 3.3 L/min ( adjustable ) Power Rechargeable NIMH battery Operating Time ≥8 hours Charging Time 10 to 12 hours Alarm Output 90 dB at 3 ft Digital Output RS-232 Data Storage 21,500 data points Sampling Rate 1 second, 1 minute, 10 minutes Temperature Operating : 0 to +50°C ( 32 to 122°F )Storage : -20 to +70°C ( -4 to 158°F ) Dimensions ( excluding sensor ) 14 x 8.3 x 7 cm ( 5.5 x 3.25 x 2.75" ) Weight 900 g   Haz-Dust IV Description Part Number HAZ-DUST IV Monitor Kit, includes: monitor, Thoracic sampling head, in-line 37 mm cassette, zeroing filter for inhalable, carry case, computer cable, AC Charger 110-240 V, HAZ-DUST Media CD with instruction manual and DustComm Pro Software(requires calibration with equipment, sold separately below) 770-4004 Accessories Description Part Number IOM Sampling Head with 25 mm cassette 225-70A IOM Adaptor, for mounting IOM sampling head on HAZ-DUST IV 770-4204 Thoracic Impactor, mounts on inlet of HAZ-DUST IV sensor 770-4107 Respirable Impactor, GS-3 Cyclone, mounts on HAZ-DUST IV sensor 225-103 Adaptor for Respirable Impactor, required when using GS-3 Cyclone 770-313 Calibration Standard, for verifying span and optical sensor performance 770-140 Calidaptor, adaptor for calibrating the Inhalable IOM Sampling Head 391-01 Rotameter 0.3-3.4 L/min, for calibrating the Inhalable Sampling Head 393-0334 Calibration Jar, for calibrating and setting pump airflow when using GS-3 Cyclone 225-112 Zeroing Filter, for use with Inhalable Impactor 770-4202A Zeroing Filter, for use with Respirable and Thoracic Impactors 770-4102 Cleaning Kit, includes dust-free air canister, lens cleaning solution, swabs and lens tissue 770-305 AC Charger 110-240 V 770-319 Replacement Battery Pack 770-4105  
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Epam 5000 Particulate Air Monitor

Epam 5000 Particulate Air Monitor

Tester Insulasi
EPAM 5000 Particulate Monitor The EPAM 5000 is a highly sensitive and accurate portable monitor for ambient and environmental monitoring. Interchangeable size-selective sampling heads for PM10, PM2.5, PM1.0 and TSP enables specific particle fractions to be targeted. Easy to set up and use. Weatherproof case Clear display provides instantaneous readings ( concentration, TWA, STEL, Minimum, Maximum ) Simultaneous direct reading and gravimetric sampling measurements Interchangeable size-selective sampling heads for PM10, PM2.5, PM1.0 and TSP Integral sample pump Up to 24 hours operation on one battery charge Continuous operation with AC adaptor or optional solar panel Easy to use DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time Technical Specification   Accuracy ±10%Sensing Range 0.001 to 20 mg/m3 Display Resolution 0.01 mg/m3 Particle Size Range 0.1 to 100 µm Measurement Precision ±0.03 mg/m3 ( 3 µg/m3 ) Calibration NIOSH 0600 gravimetric reference - NIST traceable SAE fine test dust Displayed Particle Concentration Instantaneous, TWA, STEL, Minimum, Maximum Sample Flow Rate 4 L/min Power Rechargeable Lead-acid battery or AC adaptor Operating Time ≥24 hours Charging Time Approx 22 hours Alarm Output 90 dB at 3 ft Digital Output RS-232 Data Storage 21,600 data points Sampling Rate 1 second, 10 seconds, 1 minute, 30 minutes Temperature Operating : -10 to +50°C ( 14 to 122°F ) Storage : -20 to +70°C ( -4 to 158°F ) Dimensions 15.2 x 35.6 x 25.4 cm ( 6 x 14 x 10" ) Weight 5400 g KitsDescription Part Number EPAM 5000 Kit, includes: monitor, choice of size-selective impactor, battery, AC Charger 110-240 V, rotameter, DustComm Pro Software, RS-232 computer cable, manual, weather tight carry case Kit with PM10 impactor Kit with PM2.5 impactorKit with PM1.0 impactor770-203770-202770-201 Accessories Description Part Number Impactor PM1.0, interchangeable 770-204 Impactor PM2.5, interchangeable 770-205 Impactor PM10.0, interchangeable 770-206 Impactor Grease 770-211 Impactor Sleeve, holds impactor for insertion into the sampling inlet 770-212 Calibration Standard, for verifying span and optical sensor performance 770-207 Filter Holder, 47 mm for gravimetric sampling (requires filters, sold separately) 770-215 PTFE Gravimetric Filter with PTFE support, 47 mm 2.0 µm pore size, pack 50 225-2748 Quartz (Tissuquartz) Gravimetric Filter, 47 mm, 432 µm thick, pack 25 225-1823 Zeroing Filter 770-214 Tripod, adjustable stand (1 to 2 m) and mounting plate for unattended monitoring 770-217 Solar Power Panel, provides continuous power where AC mains is not available or accessible 770-230 Precipitation Cap, prevents rain and mist directly entering the sensor 770-216 Ultrasonic Wind Speed and Direction Sensor, Wind Speed range: 0-90 MPH/0-40 m/s, Wind Direction range: 0-360°, and includes GPS to 3 m accuracy and Barometric Pressure measurement range: 300-1100 mbar 770-237 Radio Modem, 900 MHz with up to 460 m line-of-sight transmission 770-505X Remote Sampling Probe, stainless steel with 1.8 m of Tygon tubing, for hard to reach areas 770-226 Internal Zeroing Filter and Tubing 770-218 Cleaning Kit, includes dust-free air canister, lens cleaning solution, swabs and lens tissue 770-305 AC Charger 110-240 V , can be used to operate EPAM 5000 continuously 770-219 Replacement Battery Pack 770-229 Wireless Network Software for Windows and Apple Computers 770-507  
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Kanomax 3887 Handheld Particle Counter

Kanomax 3887 Handheld Particle Counter

Tester Insulasi
Kanomax handheld particle counters are designed for cleanroom certifications. The Model 3887 3-channel particle counter is CE certified and ensures compliance with industry standards, such as ISO 14644-1. It is also perfect for initial assessment of indoor particulate levels and provides instant, repeatable levels of toxic parameters, VOCs and particulates.Applications. Cleanroom Verification / Monitoring Clean Bench Verification IAQ Investigation Food Process Investigation Hospital Surgical Room Filter Testing Features 0.3, 0.5, and 5.0 um sensitivity Built-in flow sensor ( 0.1 CFM +/- 10% ) Network capable up to 8 units using Windows software Specifications  Measuring Particle Size 0.3um, 0.5um, 5.0um  Flow Rate  0.1 cfm ( 2.83 l/min )  Light Source Laser Diode  Calibration PSL particles in air  Counting Efficiency 50% at 0.3 um; 100% for particles > 0.45 um ( ISO 21501-4 )  Zero Count Less than 1 count / 5 minutes ( ISO 21501-4 )  Coincidental Loss Less than 5% at 2,000,000 particles/cf  Sampling Time 1 sec - 99 min 59 sec ( 1 second increment )  Sampling Frequency 1 - 99 or continuous  Count Modes Single, Repeat, Continuous, Calculation, Remote and ISO mode  Display LCD: 20 letters, 4 lines   Interface RS232C or RS485  Baud Rate 9600 bps  Buffer Memory 8,000 sample records Power AC Adapter 5VDC at 2.5A, 100 - 240VAC, 50 to 60 Hz Battery 4 x AA Battery Operating Time 3 hrs with 1600mAh Batteries  Vacuum Source Internal pump, flow controlled  Dimensions W 4.3 x D 2.7 x H 7.7 inch  ( 108 x 68 x 196 mm )  Weight 1.5 lbs ( 680 g )  Accessories  Isokinetic Probe, AC Adapter, Zero Filter, Battery & ChargerUtility Software, Communication Cable  Options Thermal Printer, Printer Cable, Carrying Case, Tripod
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Major Megger Insulation Testers

Major Megger Insulation Testers

Tester Insulasi
CALL:A.WIHARTA081294124885085778084789087784022201Karya Mandiri Instrument indonesia adalah supplier peralatan laboratorium baik eletronik maupun mekanik, serta berbagai macam instrument measurement, dengan didukung dari berbagai macam merk dari negara negara Eropa, US, dan beberapa negara di Asia seperti Korea, Japan dan Taiwan. Instrument yang kami sediakan seperti : Anemometer, Analitical Balance, Spectrophotometer, pHmeter, Laser survey, Micropipette, Peristaltic Pump, Flame photometer, Water bath heating cooling, Colorimeter, Water Strirer, Viscometer. Freezers, Refractometer, Polarimeter, Sound Level meter, Tachometer. Dll Kami juga menerima jasa service dan kalibrasi untuk peralatan laboratorium sesuai kemampuan kami.     Description • No scale multipliers • Multiple test voltages for spot and step voltage testing • Guard terminal to eliminate surface leakage current The MJ459 and MJ159 replace the BM12 and MJ10, respectively. Four models are available for general purpose testing which include a low-voltage model. All are portable, self-contained instruments designed to give rapid and accurate measurements. Four of the models feature an analog display having four selectable test voltages of 100, 250, 500 and 1000 V dc, measuring insulation resistance up to 2000 M-Ohms, and an ohm range to 5000 ohms. The other model has four test voltages of 50, 100, 250 and 500 V dc measuring insulation resistance up to 1000 M-Ohms.
Harga
Hubungi Kami
Min. Order
0 buah

  • Karya Mandiri Instrument Indonesia

    Jakarta Timur • DKI Jakarta • Indonesia
Aerotrak Handheld Particle Counter 9303 TSI

Aerotrak Handheld Particle Counter 9303 TSI

Tester Insulasi
Product Details The TSI AeroTrak® Handheld Particle Counter Model 9303 offers the most features and flexibility for customers interested in a low cost and versatile handheld particle counter. The Model 9303 features a sturdy yet lightweight high-impact injection-molded plastic design for easy handling. The instrument is easy to configure using an intuitive keypad. The internal memory can store up to 1,500 sample records of particle count data which can be conveniently viewed on screen or downloaded using a USB port to TSI’s TrakPro™ Lite Secure Software. The instrument reports up to three particle sizes simultaneously. The middle channel is user selectable for either 0.5, 1.0, 2.0, or 2.5 μm. The Model 9303 complies with all the stringent requirements set forth in ISO 21501-4. It is calibrated with NIST traceable PSL spheres using TSI’s world-class Classifier and Condensation Particle Counters, the recognized standard for particle measurements. Features and Benefits 0.3 to 25 μm size range 0.1 CFM ( 2.83 L/min ) flow rate Up to three channels of simultaneous data ISO 21501-4 compliant USB serial output Compatible with TrakPro Lite Secure  1,500 sample record storage 250 location labels Large 3.2-inch ( 8.1-cm ) display On screen data review User selectable middle size channel Removable Li-ion battery Intuitive keypad menus High impact injection molded plastic Lightweight - only weighs 1.3 lbs ( 0.58 kg ) Applications Tracking down particle contamination sources Classifying clean areas Looking for filter leaks Conducting IAQ investigations.
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
Aerotrak Portable Particle Counter Series TSI

Aerotrak Portable Particle Counter Series TSI

Tester Insulasi
  Specifications Size Range : 0.5 to 25 μm Particle Channel Sizes : 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm ( additional channel sizes available ) Size Resolution : 0.75 μm ( per ISO 21501-4 and JIS ) Concentration Limit : 425,000 particles/ft³ ( 15,000,000/m³ ) @ 10% coincidence loss Light Source : Long life laser diode Zero Count : Flow Rate : 3.53 CFM (100 L/min) ±5% accuracy ( meets ISO 21501-4 and JIS B9921 ) Flow Rate Control : Electronic, automatic closed loop ( patented* flow control technology ) Sample Tube : Up to 26.2 ft ( 8 m ) Extension Sampling Modes : Manual, automatic, beep; cumulative/differential; count or concentration Sampling Time : 1 second to 99 hours Sampling Frequency : 1 to 9999 cycles or continuous Exhaust : Internally HEPA filter Vacuum Source : Internal pump Communication Mode : Modbus® TCP over Ethernet or USB Audible Alarm : Built-in; >85 dB at 1 meter ( adjustable ) Status Indicators : Low battery, flow, laser Alarm Output : Dry contacts, closed when alarm is engaged Alarm Limits : Programmable for all particle channels Display : VGA 5.7-inch (14.5 cm) touch-screen display Languages : English, German, French, Spanish, Japanese, Chinese ( simplified ), Italian Printer : Built-in thermal printer ( also available without printer ) Printer Output : Prints in all available languages Environmental : Supports TSI Probe Models: 960, 962, 964, 966 Sensor Interface : ( air velocity/temp/RH ) and Temp/RH probe External Chemical : Isopropyl alcohol, chlorinated solution, Resistance : hydrogen peroxide Software : Compatible with TrakPro Lite Secure and FMS 5 software Unit ID : Configurable IP address Security : 2-level password protection to lock out usage and configuration Data Storage : 250 Zones 999 Locations 10,000 sample records including: date, time, six total particle size channels, flow status, and instrument status Data Transfer : Via USB storage device, connection to the TrakPro Lite Secure software through Ethernet or USB cable, or optional TSI FMS Software Reports : Provides Pass/Fail on ISO 14644-1, EU GMP, and FS209E reports Calibration : NIST traceable using TSI calibration system Calibration Frequency : Recommended minimum of once per year Dimension (H x W x D) : 9.5 in. x 9.0 in. x 9.2 in. ( 24.1 cm x 23.0 cm x 23.2 cm ) ( without isokinetic inlet ) Weight : 14.2 lbs ( 6.44 kg ) with two batteries Power : 110 to 240 VAC universal power supply Battery : Removable/rechargeable Li-Ion batteries ( 2 battery slots ) Battery Life : >2 hours of continuous operation Battery Recharge : 4 hours ( when idle ) External Surface : Stainless steel Operating Range : 36 ̊ to 95 ̊F ( 2 ̊ to 35 ̊C ), 20% to 95% RH noncondensing Storage Range : 32 ̊ to 122 ̊F ( 0 ̊ to 50 ̊C ), up to 98% RH noncondensing Standards : ISO 21501-4, CE, JIS B9921 Warranty : Two years, extended warranties available Included Accessories : Printed QuickStart guide, operating manual on CD, power supply, battery, barbed inlet, isokinetic probe, tubing, purge filter, printer paper, USB cable and TrakPro Lite Secure Software Optional Accessories. : Electronic filter scanning probe, basic filter scanning probe, TSI velocity probes, Temp/RH probe, additional battery, dual port external battery charger, isokinetic probes, sample tubing, carrying case
Harga
Hubungi Kami
Min. Order
1 buah

  • CV PALLSCIENTIFIC

    Jakarta Barat • DKI Jakarta • Indonesia
  • dari 27 halaman